components product information connector new 1/4 mb-0250-2 march 2013 jae pmk div. proprietary. copyright ? 2013, japan aviation electronics industry, ltd. ? no. of contacts: 8 pos.+2pos. (d-sw) ? contact resistance: 100m ? max. (initial value) ? dielectric withstanding voltage: ac500vr.m.s. per minute ? operating temperature: -30 deg. c to +85 deg. c ? storage temperature: -5 deg. c to +85 deg. c features ST11-H series microsd tm memory card connector general specifications ? push-push structure, st andard-mounting connec tors for the microsd tm memory card standardized by sda tm ? balanced emi countermeasur e with 7 hold-down points ? slim design with 1.25mm height, 13.4mm wi dth, and 15.3mm de pth (depth including card: 17mm) ? halogen free, supplied in embossed tape for automatic mount ing (compatible with second reflow) ? card insertion detection structure (d-sw), normally closed type ? card lock structure ? 1mm push stroke , 3.4mm card eject length ? countermeasure to prevent the card from popping out. ? rated current: 0. 5a / per pin ? rated voltage: 10v / per pin ? insulation resistance: 1,000m ? min. ? lifetime: 5,000 times ? card insertion force: 40n max. rohs compliant overview the ST11-H series are one-piece type external connecto rs for micro sd tm cards. these connectors are high density, sm t mounting, low profile, push-push type connectors compatib le with the microsd tm card, which is standardized by sda tm as a compact card for hand-held devices. * microsd tm is a trademark of sd card a ssociation.
mb-0250-2 2/4 jae pmk div. proprietary. copyright ? 2013, japan aviation electronics industry, ltd. materials and finishes component material / finish signal contact d-sw contact copper alloy / contact: au plating over ni terminal: au flash plating over ni housing synthetic resin / none cover frame stainless steel / terminal area: au flash plating eject bar synthetic resin / none spring stainless steel / none lock stainless steel / none cam follower stainless steel / none ordering information st11 s 008 v 4 h (r2000) 4: au flash plating v: smt mounting, with hold-downs no. of contacts series connector type s: non-zif structure modification code reel part number (note) note) an embossed tape re el contains 2,000 pcs. please contact us for details on embossed tape specifications.
mb-0250-2 3/4 jae pmk div. proprietary. copyright ? 2013, japan aviation electronics industry, ltd. sj113824 st11s008v4h sj drawing part number table 1 circuit unit: mm
mb-0250-2 4/4 jae pmk div. proprietary. copyright ? 2013, japan aviation electronics industry, ltd. applicable board dimensions (for reference) unit: mm notice: products shown in this brochure are made for the applications listed below. however, if the above-mentioned products are to be used in aerospace devices, marine cable-conne ction devices, atomic power control systems, me dical equipment for life- support systems, or any ot her specific application requiring extremely high re liability, please contact jae for further information. recommended applications : computers, office machines, measuring devices, telecommunication devices (terminals, mobi le devices), av devices, household applicati ons, fa devices, etc. product marketing division aobadai building, 3-1-19, aobadai, meguro-ku, tokyo 153-8539 phone: +81-3-3780-2882 fax: +81-3-3780-2946 * the specifications in this brochure are subject to change w ithout notice. please contact jae for information.
|